888-762-4045
ABOUT
CONTACT US
WELDING HELMETS
WELDERS
WELDING TABLE
CART & CABINETS
SUPPORT
CONTACT US
1760 Prospect Ct #120
Appleton, WI 54915
Phone:
920-380-7440
Toll Free:
888-762-4045
Fax 920-243-1633
Toll Free
HELP LINE
WELDING CARTS
Up to 10” Cylinders
UWC1 -
Universal Welding Cart
designed to make maneuvering your welder
easy. The single cylinder rack is capable
of holding up to a 7-1/2 inch diameter, 80 lb
cylinder and comes with a securement chain to
hold the cylinder in place. The slanted
top shelf accommodates most brands of
welding equipment and places the welder
controls at an easy to use angle.
UWC2 -
Designed to make maneuvering your
welder easy. The single cylinder rack is capable
of holding up to a 7-1/2 inch diameter, 80 lb
cylinder and comes with a securement chain to
hold the cylinder in place. The slanted top shelf
accommodates most brands of welding
equipment and places the welder controls at an
easy to use angle. This great cart now comes
with a NEW fold down handle. Use the handle
to easily move your welding equipment into
place then fold down the handle for easy
access to welder controls. NEW wrap around
cable holders help keep your cables organized.
UWC4 -
Heavy Duty Single/Dual Bottle Welding
Cart is designed for multiple uses. It can be
used to hold portable wire welders, plasma
cutters and TIG welders along with the bottle
of shielding gas needed for that application. Its
unique Cylinder rack allows you to configure it
to carry one bottle of gas up to 10 inches in
diameter and up to 300 cu. Ft.; or two separate
bottles of gas up to 7-1/2 inches in diameter or
150 cu. Ft each. Or use this welding cart to
hold two separate welders or a welder and a
plasma cutter. The third use for this Cart is as
a power source and feeder cart. The bottom
shelf has an 18 inch clearance, giving ample
space to store a smaller, inverter-based
welding power source on the bottom shelf.
The top shelf has ample space to fit a wire
feeder. In addition, the top of the cylinder
securement rack can be removed to
accommodate the wire feeder spool holder
and a large spool of wire.
TTWC1 -
Three-Tier Welding cart puts the
welder controls at a comfortable working
height and has storage shelves for all your tools
and accessories. The single cylinder rack is
capable of holding up to a 6-1/2 inch diameter
cylinder and comes with two securement
chains to hold the cylinder in place. The slanted
top shelf accommodates most brands of
welding equipment and places the welder
controls at an easy to use angle
WELDING CABNIETS
Up to 10” Cylinders
EWC2 -
Mini welding cabinet helps keep your
shop organized by stowing all your welding
tools and accessories. It is designed for the
welder to sit on top of cabinet, has a 7 1/2in.
gascylinder configuration, and is on wheels and
casters for easy maneuvering.A keyed storage
cabinet helps to secure your welding helmet
and other welding accessories. Two cable
holders provide easy access to welding cables.
TTWC3 -
Three-Tier Welding Cabinet is a great
way to organize your welding tools. The top
shelf has ample space for most brands of
welders. The shelf is 34 inches off the floor
putting your welder at a good working height.
The slight backwards slope gives the operator
easy view of the welder controls. A reversible
tow handle allows you to position it best for
your welder. The tall second shelf is well
positioned for that second welding tool. Maybe
it’s a plasma cutter or a small stick welder. This
cart allows you to store both welders on one
cart. The lockable cabinet at the bottom of the
cart gives you secure storage for your welding
helmet and other welding accessories.
DWC1 -
Deluxe welding cabinet provides an
integrated all-in-one solution for a portable
welder or plasma cutter applications. Designed
for equipment to sit on top of cabinet, and a 7
1/2in. gas cylinder configuration, it makes
maneuvering a snap. It includes 4 drawers of
varying sizes that provide convenient storage
for helmet, hammer, brush and other welding
accessories, along with hooks that provide easy
access to welding cables.
CYLINDER CARTS
Up to 10” Cylinders
CCSM -
This small cylinder cart is easy to
assemble and holds 8" acetylene and 7" oxygen
cylinders. This unit comes in two sub
assemblies for easy shipping and is quickly
assembled with 4 nuts & bolts and one axle
with two washers and two cotter pins. This cart
features a single handle and 6" wheels that
make it easy to maneuver. The handy storage
box has a cover to keep all your tools and
supplies out of the weather.
CCMD -
T
his medium cylinder cart is easy to
assemble and holds up to 9-1/4" acetylene and
7-1/2" oxygen cylinders. This unit comes in two
sub-assemblies for easy shipping and is quickly
assembled with 4 nuts & bolts and one axle
with two washers and two cotter pins. This cart
features a "T" style handle and 7" wheels that
make it easy to maneuver. The handy storage
box has a cover to keep all your tools and
supplies out of the weather.
CCLG -
T
his large cylinder cart is easy to
assemble and holds 11" acetylene and 10"
oxygen cylinders. This unit comes in two sub-
assemblies for easy shipping and is quickly
assembled with 4 nuts & bolts and one axle
with two washers and two cotter pins. This cart
features bullhorn type handles and large 10"
wheels that make it easy to maneuver. The
handy storage box has a cover to keep all your
tools and supplies out of the weather.
Carts
|
Cabinets
|
Cylinder Carts
|
Top
FLUX CORE/MIG WELDERS
TIG WELDER
STICK WELDERS
ALL WELDERS
WELDING CARTS
WELDING CABINETS
CYLINDER CARTS
PARTS
OWNERS MANUAL
SAFETY
HISTORIC PRODUCTS
888-762-4045
ABOUT
CONTACT US
WELDING HELMETS
WELDERS
WELDING TABLE
CART & CABINETS
SUPPORT
CONTACT US
1760 Prospect Ct #120
Appleton, WI 54915
Phone:
920-380-7440
Toll Free:
888-762-4045
Fax 920-243-1633
WELDING CARTS
Up to 10” Cylinders
UWC1 -
Universal Welding Cart
designed to make maneuvering your welder
easy. The single cylinder rack is capable
of holding up to a 7-1/2 inch diameter, 80 lb
cylinder and comes with a securement chain to
hold the cylinder in place. The slanted
top shelf accommodates most brands of
welding equipment and places the welder
controls at an easy to use angle.
UWC2 -
Designed to make maneuvering your
welder easy. The single cylinder rack is capable
of holding up to a 7-1/2 inch diameter, 80 lb
cylinder and comes with a securement chain to
hold the cylinder in place. The slanted top shelf
accommodates most brands of welding
equipment and places the welder controls at an
easy to use angle. This great cart now comes
with a NEW fold down handle. Use the handle
to easily move your welding equipment into
place then fold down the handle for easy
access to welder controls. NEW wrap around
cable holders help keep your cables organized.
UWC4 -
Heavy Duty Single/Dual Bottle Welding
Cart is designed for multiple uses. It can be
used to hold portable wire welders, plasma
cutters and TIG welders along with the bottle
of shielding gas needed for that application. Its
unique Cylinder rack allows you to configure it
to carry one bottle of gas up to 10 inches in
diameter and up to 300 cu. Ft.; or two separate
bottles of gas up to 7-1/2 inches in diameter or
150 cu. Ft each. Or use this welding cart to
hold two separate welders or a welder and a
plasma cutter. The third use for this Cart is as
a power source and feeder cart. The bottom
shelf has an 18 inch clearance, giving ample
space to store a smaller, inverter-based
welding power source on the bottom shelf.
The top shelf has ample space to fit a wire
feeder. In addition, the top of the cylinder
securement rack can be removed to
accommodate the wire feeder spool holder
and a large spool of wire.
TTWC1 -
Three-Tier Welding cart puts the
welder controls at a comfortable working
height and has storage shelves for all your tools
and accessories. The single cylinder rack is
capable of holding up to a 6-1/2 inch diameter
cylinder and comes with two securement
chains to hold the cylinder in place. The slanted
top shelf accommodates most brands of
welding equipment and places the welder
controls at an easy to use angle
WELDING CABNIETS
Up to 10” Cylinders
EWC2 -
Mini welding cabinet helps keep your
shop organized by stowing all your welding
tools and accessories. It is designed for the
welder to sit on top of cabinet, has a 7 1/2in.
gascylinder configuration, and is on wheels and
casters for easy maneuvering.A keyed storage
cabinet helps to secure your welding helmet
and other welding accessories. Two cable
holders provide easy access to welding cables.
TTWC3 -
Three-Tier Welding Cabinet is a great
way to organize your welding tools. The top
shelf has ample space for most brands of
welders. The shelf is 34 inches off the floor
putting your welder at a good working height.
The slight backwards slope gives the operator
easy view of the welder controls. A reversible
tow handle allows you to position it best for
your welder. The tall second shelf is well
positioned for that second welding tool. Maybe
it’s a plasma cutter or a small stick welder. This
cart allows you to store both welders on one
cart. The lockable cabinet at the bottom of the
cart gives you secure storage for your welding
helmet and other welding accessories.
DWC1 -
Deluxe welding cabinet provides an
integrated all-in-one solution for a portable
welder or plasma cutter applications. Designed
for equipment to sit on top of cabinet, and a 7
1/2in. gas cylinder configuration, it makes
maneuvering a snap. It includes 4 drawers of
varying sizes that provide convenient storage
for helmet, hammer, brush and other welding
accessories, along with hooks that provide easy
access to welding cables.
CYLINDER CARTS
Up to 10” Cylinders
CCSM -
This small cylinder cart is easy to
assemble and holds 8" acetylene and 7" oxygen
cylinders. This unit comes in two sub
assemblies for easy shipping and is quickly
assembled with 4 nuts & bolts and one axle
with two washers and two cotter pins. This cart
features a single handle and 6" wheels that
make it easy to maneuver. The handy storage
box has a cover to keep all your tools and
supplies out of the weather.
CCMD -
T
his medium cylinder cart is easy to
assemble and holds up to 9-1/4" acetylene and
7-1/2" oxygen cylinders. This unit comes in two
sub-assemblies for easy shipping and is quickly
assembled with 4 nuts & bolts and one axle
with two washers and two cotter pins. This cart
features a "T" style handle and 7" wheels that
make it easy to maneuver. The handy storage
box has a cover to keep all your tools and
supplies out of the weather.
CCLG -
T
his large cylinder cart is easy to
assemble and holds 11" acetylene and 10"
oxygen cylinders. This unit comes in two sub-
assemblies for easy shipping and is quickly
assembled with 4 nuts & bolts and one axle
with two washers and two cotter pins. This cart
features bullhorn type handles and large 10"
wheels that make it easy to maneuver. The
handy storage box has a cover to keep all your
tools and supplies out of the weather.
Carts
|
Cabinets
|
Cylinder Carts
|
Top
WELDING HELMETS
WELDERS
WELDING TABLE
CARTS & CABINETS
SUPPORT